To hold a Spyderco knife is to feel true quality in the palm of your hand. Spyderco have more than 30 years of research and development behind them to produce the finest steel blades and ergonomically designed handles on the market.
Spyderco claim to have revolutionized knife making so we’ve done some research to investigate. This article will offer advice and guidance to any novices who are interested in purchasing a Spyderco knife. We will give you the best possible idea of what you should be looking for among the seemingly infinite list of Spyderco products and how to choose one that is right for you.
After reviewing all the top OFT knives available, we’ve selected our top 7 picks in the comparison table below. We’re confident you’ll find the perfect model for your needs.
Mobile Users: For optimal viewing, tilt your phone to landscape (wide-view) to see the entire table.
When flirting with the idea of buying a new knife, there are many considerations. You have already narrowed it down to one brand by opting for a Spyderco knife, but there is still have a huge selection to look at, so you need to think a little more specifically.
Blade design is a key area of note. As you probably know, knives can have a number of different blade types. This means that you need to think about what you will be using your knife for. A serrated edge is best for industrial use, where you may be sawing through hard materials or ropes. For self-defense purposes, a double edged blade like a boot knife is a better choice.
You should also consider the tang. The tang is the weakest part of the knife, where blade meets handle. The construction of the tang is incredibly important. You should familiarize yourself with the different types of tangs. Full tangs and hidden tangs are best. A full tang extends almost the full length and width of the handle, making it the strongest type of tang. A hidden tang is narrower and weaker. It doesn’t extend to the full length of the handle and is secured using pins to prevent it from moving. However, flip knives or pocket knives do not have a tang. While this is a necessary exclusion, it can make for a slightly weaker knife.
Blade steel is also important. When you know what you will be using the knife for, you’ll have a better idea of what kind of steel you need. The blade needs to be able to hold an edge and be tough enough to withstand lateral forces that could break the blade. Stainless steel is known for its ability to hold an edge, but it is not particularly strong. Carbon steel is the opposite. It holds edge poorly but it’s much stronger. So a compromise is the best option when considering blade steel. High carbon steel is a good metal to settle on.
The handle design and material are important too. You need something that fits comfortably in your hand so that you have the best possible grip. You need a strong tang, and the handle should have an ergonomic design with a grip to enable control over the edge and the tip of the blade. Knives with full or hidden tangs are the best for their strength. Handle material should be durable and slip resistant. Some good materials for a handle are linen Micarta, canvas Micarta, G10, Zytel, Hypalon and Krayton.
Finally, get a feel for the knife in your hand. Consider the weight and if it will have any impact on its performance. Basically, you really need to think about why you are buying the knife in order to make the best decision. Use this list of considerations to help you narrow it down, then find the knife that is best suited to you.
Top 5 Rated Products
This really is the everyman’s knife. It’s one of the most popular pocket knives on the market, and will be found folded in the pocket of any man who enjoys quality craftsmanship for a good price. This measures up very well against more expensive knives in the same bracket. It’s made from the highest quality materials, namely the 8CR13MOV blade steel and G-10 handle. The blade measures at 3.39 inches, with an overall length of 7.76 inches.
Every knife from Spyderco is tested for quality and endurance, ensuring you’re always getting a great product. And that’s why customers are almost always satisfied with the quality of this knife. The blade is incredibly sharp, making it suited to almost every job that you would consider a pocket knife for. Although it is extremely well made, some customers are upset that the knife is made in China and not the US. Having said that, it is designed in the States and simply constructed in China.
Spyderco Paramilitary 2
When it comes to the quality of this knife, just ask the police and military who use this knife every day, and you will understand why it’s so popular. It has a 4-way clip for carrying it in different ways to best suit your situation. It’s thin enough to not get in the way of other gear you might be carrying and has a 14mm thumb hole for deployment whilst handled in gloves, making it suitable for all weather types. It’s exactly the kind of knife you’ll want in your belt, boot or pocket if your gun fails and you need protection badly.
Customers love the ergonomic design of this knife, along with the brilliantly sharp steel blade. Some queries that arose were uncertainties over whether or not customers actually needed this knife. It is an incredibly reliable knife but comes at a bit of a cost, one that might be smaller with other knives of lesser quality.
This is a brilliant, ultra light pocket knife that is easily concealed on your person. You’d never know it’s there. It fits quite easily into the palm of your hand, measuring just 2.75 inches when closed. The plain edge blade steel is flat-ground 8Cr13MoV, which is very durable. The handle is stainless steel with a slip joint lock for convenient attachment qualities. The blade stays firmly in place when in use due to the resistant pressure at the knife’s pivot. The handle is comfortable in your hand. It is chambered and has no square edges that might dig into the hand.
Customers really liked the size of this knife, likening it to a Swiss Army Knife. It’s extremely convenient, particularly for outdoor activities like camping. The main complaint (of which there were few) was that it is a rare SPLIT variety, and doesn’t have the same easy open blade of other Spyderco models. However, the other features of this knife more than make up for this small issue.
The collection of Value Folders are each named after admirable human qualities. Resilience is certainly a human quality, but it is also a virtue of this brilliant knife. It is the largest of the collection. It has a full flat-ground 8Cr13MoV steel blade with top to bottom cutting edge. Cross-hatches along the spine prevent any slipping of the thumb while cutting. The G-10 handle has skeletonized steel liners inside, with a Michael Walker line lock. The handle is screwed together with phosphor bronze washers around the pivot for a smooth, resistance-free cutting action. It also has a stainless pocket clip, which is four-way compatible tip-up or tip-down and left or right hand carrying.
Customers were delighted with this knife. They loved the quality construction and its useful size. The only complaint was the location of the clip leaves a slight margin for error when opening. If you are not careful, you may clip your hand and cut yourself. With this in mind, anyone using a knife should be careful at all times. Otherwise, this is a quality, durable knife and excellent value for money.
Spyderco Delica4 Lightweight
You may already be familiar with the Delica or Endura models from Spyderco, which are some of the best knives they have released. The Delica4 is slightly different from the regular C10 Endura4 and the C11 Delica4 Lightweights. These knives are now available with a range of new colors on the handles, as well as with full flat-ground blades. The fiberglass reinforced nylon handles are available in blue, green, brown, grey or purple for easy organization in storage. The handles are molded to Bi-Directional Texturizing, which offers slip-free tactile action. And like the Resilience, they have skeletonized stainless steel liners to strengthen the knife without adding excessive weight.
Customers really liked this knife, particularly the straight edge leaf blade. This gives the knife the ability to cut in a similar way to both straight edge and drop edge knives. The one pitfall customers had with this knife was the Spyder Hole – the ring with which you pull the knife open. One customer mentioned that it felt a little sharp on their finger when they opened it. However, this was a small complaint and should not deter someone from purchasing a great tool.
The benefits of owning a Spyderco knife are obvious. With this purchase, you are guaranteed satisfaction, quality and durability at a price much lower than other knives. All Spyderco products are quality tested, meaning they are not released until the manufacturers are totally satisfied. They are one of the most trusted manufacturers on the planet because they have decades of experience behind them. Something not many knife manufacturers can lay claim to.
Remember, before purchsing you need to consider blade material and length. What are you going to be using this knife for? Will it require a long or short blade? As a piece of protection, you should consider a smaller, more concealable knife. For heavy duty work, you may want something larger.
We feel that the Spyderco Tenacious is the best knife to recommend from this list. It is the most versatile and would suit just about anyone interested in purchasing a Spyderco product. The Tenacious is their most popular knife and has been since its conception. The incredibly sharp blade makes it suitable for just about any job, it’s small enough to be carried around with relative ease and big enough to tackle almost any task.
Image credit via Flickr Creative Commons: Brian C